How long does epoxy floor installation take?

Most residential garages are completed in one day (6–10 hours). Walk on it the next morning; vehicles back in 24 hrs (polyaspartic) or 72 hrs (epoxy).

Epoxy or polyaspartic — which is better for Fulshear garages?

Polyaspartic is the stronger choice for sun-exposed Fulshear garages. Slab temps can hit 130°F in July and August; polyaspartic is UV-stable, handles that heat, and cures in 24 hours.

Epoxy Garage Floor Coating in Fulshear, TX

Coating options

Three finishes. One crew.

Every system starts with a diamond-ground slab. What goes on top is your choice.

Decorative Flake

Polymer chips broadcast into wet epoxy, sealed with a clear polyaspartic topcoat. Slip-resistant, hides minor surface flaws, 40+ color blends. The most popular finish in Cross Creek Ranch.

$4.50 – $6.50 / sq ft installed

Clean & Simple

Solid Color Epoxy

High-gloss seamless surface in any standard epoxy color. Popular for commercial spaces and homeowners who want a clean minimal look. Same diamond-ground prep as every system we install.

$3.50 – $5.00 / sq ft installed

Best for TX Heat

Premium

Polyaspartic Coating

UV-stable. Cures in 24 hours. Handles 130°F slab temps common in Fulshear summer garages. This is the system we recommend for any garage with sun exposure on the door side.

$6.00 – $9.00 / sq ft installed

Most 2-car garages (400–550 sq ft) fall between $1,800 – $3,500 fully installed — grind, crack fill, coatings, and topcoat included. Exact price after free on-site measurement.

How it works

Done right, the first time.

Prep is where cheap coatings fail. We don't skip it.

Free On-Site Estimate

We measure, inspect the slab for moisture and cracks, and give you a firm written quote the same day. No pressure, no ballpark pricing.

Diamond Grind & Prep

We grind to a CSP-3 open profile, fill cracks with flexible polyurea, and vacuum the surface completely clean before any product touches the slab.

Coat & Broadcast

Moisture-tolerant primer, color base coat, polymer flake broadcast (if chosen), and a clear polyaspartic topcoat. Each layer checked before the next goes down.

Cure & Turnover

Walk on it the next day. Vehicles back in 24 hrs (polyaspartic) or 72 hrs (epoxy). 5-year warranty against peeling, bubbling, or delamination.

Recent work

Fulshear garages we've coated.

Two-car garage before and after decorative flake epoxy coating, Fort Bend County

Residential garage — gray/black flake

Patio concrete before and after polyaspartic clear coat, Fulbrook on Fulshear Creek

Back patio — Fulbrook on Fulshear Creek

Shop floor before and after solid gray epoxy coating, Fulshear TX

Shop floor — solid industrial gray

Free quote

Tell us about your floor.

Fill out the form and we'll call you back within one business day with a firm, no-pressure estimate.

(832) 449-8510

Free, no-obligation estimate
Response within 1 business day
Firm written quote — no surprises
5-year warranty on every install

Full name *

Phone *

Service needed

Approximate size

Timeline

Anything else we should know?

We never share your information.

FAQ

Common questions about epoxy flooring.

How much does epoxy flooring cost in Fulshear, TX? +

Solid color epoxy: $3.50–$5.00/sq ft installed. Decorative flake: $4.50–$6.50/sq ft. Polyaspartic: $6.00–$9.00/sq ft. Most 2-car garages (400–550 sq ft) land between $1,800 and $3,500 fully installed — diamond grind, crack fill, coatings, and clear topcoat included. We give firm quotes after the on-site visit, not ballparks.

How long does installation take? +

Most residential garages are one full day (6–10 hours). We grind early morning, let the slab dry if needed, apply primer, color coat, flake if chosen, and the clear topcoat — all before we leave. You can walk on it the next morning; vehicles return in 24–72 hours depending on the system.

Epoxy or polyaspartic — which is better for a Fulshear garage? +

Polyaspartic wins for sun-exposed garages in Fort Bend County. Slab temps hit 120–130°F in July and August. Standard epoxy can yellow and soften under that sustained heat. Polyaspartic is UV-stable, handles the heat, and cures in 24 hours instead of 72. It costs more upfront, but lasts longer in the Texas climate. Read our full comparison here.

What if I have cracks in my concrete? +

Almost every garage in Fulshear has crack activity from the expansive Beaumont clay underneath. We fill all cracks with flexible polyurea before any coating goes down — this is non-negotiable on our installs. Structural cracks wider than 1/4″ get discussed during the estimate.

Do you offer a warranty? +

Yes — 5 years against peeling, bubbling, or delamination under normal residential use. The warranty covers our workmanship and the system as installed. It does not cover damage from battery acid spills or heavy impact from dropped equipment.

Can you coat a brand-new slab? +

Yes, but timing matters. Concrete needs a minimum 28-day cure before coating. New slabs in Cross Creek Ranch and Fulbrook are often moisture-heavy in the first 1–2 years — we moisture-test every slab and use a moisture-tolerant primer when readings are elevated, at no extra charge.

See all 25 FAQ answers

Epoxy Garage FloorCoating in Fulshear, TX